DC 12V 5.14W Slope Electromagnetic Lock Instantaneously Energized Switch Locks

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
DC 12V 5.14W Slope Electromagnetic Lock Instantaneously Energized Switch Locks
Popular
Popular
Product Introduction
Product selling points:
1. Long life: ≥　500,000 times
2. The switch is smooth and responsive
3. Instantaneous power-on, low power consumption, lower voltage than ordinary electric control locks
4. Simple structure, low use cost
5. Easy to install
The main parameters:
Voltage: DC 12V
Current: 0.4286A MAX (at 20℃)
Power: 5.14W
Direct current resistance: 28Ω±10%, ambient temperature 20℃(at 20℃)
Power-on working rate: 25% power-on working rate
Insulation class: E class (120℃)
Telescopic stroke: 4mm
Pull force: ≥80 grams force
Insulation resistance:
100MΩ between coil and frame (DC500V normal temperature/humidity)
Withstand voltage:
AC1200V (50/60Hz) between coil and frame
Maximum allowable power-on time for a single time: 15 seconds (long-time power-on is not recommended)
Temperature rise: Under the rated voltage of DC12V, the temperature rise is 65℃ Max (25% energization rate, the longest 15 seconds)
Life: ≥　500,000 times
Working temperature and humidity: -5℃ - +55℃ 5%RH - 85%RH
Direction: The direction of the lock tongue is not fixed, the lock house rotates 360°
Cable length: 15cm
Product function: used for switch locks for desks, furniture, cabinet doors, boxes, windows and doors.
Product features: The electromagnetic lock switch is smooth and sensitive. It is instantaneously energized, so it consumes less power and uses high voltage for ordinary electric control locks. This type of lock has a simple structure, low cost of use and easy installation.
Instructions for use and installation:
1. The red and black wires are the power wires of the electromagnetic lock, regardless of the positive and negative poles;
2. When the switch is turned on, the exposed length of the bolt is 4MM retracted, the door lock is opened, and when the power is off, the bolt stretches out 4MM by the internal spring force, and the door lock is locked.
Precautions:
This electric lock adopts the principle of electromagnet, only supports instantaneous power-on unlocking, and does not support long-term power-on work and excessively frequent unlocking actions. Long-term power-on will cause the electromagnetic lock to become hot and burn out the coil. Please understand this electromagnetic lock. After the characteristics, refer to the electromagnetic lock instructions for use, and then buy it after meeting your needs.
List:
Inclined electromagnetic lock*1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
DC 12V 5.14W Slope Electromagnetic Lock Instantaneously Energized Switch Locks
Product Introduction
Product selling points:
1. Long life: ≥　500,000 times
2. The switch is smooth and responsive
3. Instantaneous power-on, low power consumption, lower voltage than ordinary electric control locks
4. Simple structure, low use cost
5. Easy to install
The main parameters:
Voltage: DC 12V
Current: 0.4286A MAX (at 20℃)
Power: 5.14W
Direct current resistance: 28Ω±10%, ambient temperature 20℃(at 20℃)
Power-on working rate: 25% power-on working rate
Insulation class: E class (120℃)
Telescopic stroke: 4mm
Pull force: ≥80 grams force
Insulation resistance:
100MΩ between coil and frame (DC500V normal temperature/humidity)
Withstand voltage:
AC1200V (50/60Hz) between coil and frame
Maximum allowable power-on time for a single time: 15 seconds (long-time power-on is not recommended)
Temperature rise: Under the rated voltage of DC12V, the temperature rise is 65℃ Max (25% energization rate, the longest 15 seconds)
Life: ≥　500,000 times
Working temperature and humidity: -5℃ - +55℃ 5%RH - 85%RH
Direction: The direction of the lock tongue is not fixed, the lock house rotates 360°
Cable length: 15cm
Product function: used for switch locks for desks, furniture, cabinet doors, boxes, windows and doors.
Product features: The electromagnetic lock switch is smooth and sensitive. It is instantaneously energized, so it consumes less power and uses high voltage for ordinary electric control locks. This type of lock has a simple structure, low cost of use and easy installation.
Instructions for use and installation:
1. The red and black wires are the power wires of the electromagnetic lock, regardless of the positive and negative poles;
2. When the switch is turned on, the exposed length of the bolt is 4MM retracted, the door lock is opened, and when the power is off, the bolt stretches out 4MM by the internal spring force, and the door lock is locked.
Precautions:
This electric lock adopts the principle of electromagnet, only supports instantaneous power-on unlocking, and does not support long-term power-on work and excessively frequent unlocking actions. Long-term power-on will cause the electromagnetic lock to become hot and burn out the coil. Please understand this electromagnetic lock. After the characteristics, refer to the electromagnetic lock instructions for use, and then buy it after meeting your needs.
List:
Inclined electromagnetic lock*1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.