Kitchen Stainless Steel Noodles Hand Press Machine 4 Type Heads For Pasta Make

Description

Store category
Sign Up Now !
You may also like
Kitchen Stainless Steel Noodles Hand Press Machine 4 Type Heads For Pasta Make
Product Description
Kitchen Hand Press Noodles Maker Fresh Spaghetti Fettuccine Pasta Making Machine
Product parameters:
❖
Material:Stainless Steel
❖
Working rod: 47cm
❖
Support rod: 41.5cm
❖
Operating lever: 39.5cm
❖
Noodle barrel: 12.5x 5.7cm
❖
Weight: 5.6kg
❖
Noodle bucket off the ground: 25cm
❖
Carton size: 42x 27.5x 13cm
❖
Operating space: no less than 80cm
❖
Four face cutter heads: 1mm aperture, 2x 6mm aperture, 2mm aperture, 3mm aperture
Installation:
Step 1:
■
The whole installation of the noodle machine, first put the base positively, and then align the support rod frame at the position where the base has screw holes.
Step 2:
■
After aligning, put the screw on the screw hole, put the screw and then press the screw to roll the base and the support bar together to prepare the screw. When the screw is on, we can focus on it and so on. This ensures the installation process. The stability is good. After tightening the nut, tighten it and put it straight.
Step 3:
■
Place the handle on the top of the support bar. Hold the handle of the operating frame with one hand and place the gasket on the top of the support bar with one hand and then put the upper semi-circular nut on the equipped wrench. Here our pasta machine is basically formed.
Instructions:
1)
When mixing noodles, no matter what kind of noodles, it is best to use warm water and noodles. The noodles must be reconciled, knead well, the noodles are slightly softer, and they can not stick to hands.
2)
Loosen the adjusting screw and adjust the operation frame to fit the position of the pot.
3)
Remove the noodle bar from the noodle bucket and remove the noodle bucket.
4)
Replace the cutter head and apply a little cooking oil on it.
5)
Put the dough in the bucket and put it under the pressing plate.
6)
Turn the handle to lower the pressing bar until there is no gap with the dough.
7)
Shake the noodle bar up and down to extrude the noodles directly into the pot.
8)
You can cut the noodles or continue making noodles according to the above method.
9)
After the noodles are cooked, they can be picked up and put in cold water, soaked in water to make cold noodles, or put in a fresh-keeping box and placed in the refrigerator for later use.
10)
After use, clean the noodle bar, noodle bucket and panel easily.
Package:
✔ 1*Noodle Maker Machine
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
Kitchen Desktop Pasta Noodle Maker Spaghetti Press Machine Stainless Steel ●Product parameters: ●Material:Stainless Steel ●Working rod: 47cm ●Support rod: 41.5cm ●Operating lever: 39.5cm ●Noodle barrel: 12.5x 5.7cm ●Weight: 5.6kg ●Noodle bucket off the ground: 25cm ●Carton size: 42x 27.5x 13cm ●Operating space: no less than 80cm Installation: Step 1: the whole installation of the noodle machine, first put the base positively, and then align the support rod frame at the position where the base has screw holes. Step 2: After aligning, put the screw on the screw hole, put the screw and then press the screw to roll the base and the support bar together to prepare the screw. Package: 1*Noodle Maker Machine
On Jul-12-21 at 01:52:23 PDT, seller added the following information: