Speargun Pelengas Z-linka 550

Description

Shotgun of the Zelinsky system Pelengas Z-linka 55 is a new gun-valve developed by the Zelinsky system from the Pelengas company, especially for trophy hunting, for large pumping. A high-tech shotgun that works on the principle of a moving barrel. It has a thick-walled receiver that allows pumping pressure above normal. The piston of the gun is not tied to the sear, which allows you to remove the spear of the gun together with the piston, while leaving air in the receiver, thanks to a valve that closes the barrel. In addition, it allows air to be pumped with a harpoon. The gun also has a thread at the end with an additional air valve for pumping up with a pump, as well as for adjusting to the required values.
The underwater gun Pelengas Zelinka is a valve pneumatic gun of the Zelinsky system. The main feature of valve-type shotguns is that the piston does not experience constant pressure when cocked, and does not even have a hook that is standard for pneumatic shotguns. When the trigger is pulled, the valve opens, and the piston, under strong pressure, pushes the spear out of the barrel. Due to the valve system, it was possible to make the descent as smooth as possible, which in turn has an extremely positive effect on reducing the toss, and, consequently, improving the shooting accuracy. In general, guns of this type are several powerful standard pneumatics with comparable overall dimensions.
The main feature of the Pelengas Zelinka rifle relative to other valve-type rifles is the quality of the materials. The Pelengas Zelinka shotguns are made of very high quality materials; a time-tested handle is also used, which has almost perfect ergonomics and a quick reel attachment. Separately, it is worth noting the use of silver soldering, which provides a more reliable fixation of individual nodes to each other. Another feature is the rear injection valve (as a rule, the guns of the Zelinsky system are pumped through the muzzle, and the rear valve was preserved in the Pelengas Zelinka gun), which allows the gun to be pumped with a standard pump from the Pelengas company. The Z-Linka from Pelengas is nothing more than a valve-type shotgun made by the company according to the Zelinsky system. One of the advantages of this system is a very smooth descent, since there is no direct pairing of the piston / sear pair.
How the Z-Linka gun mechanism works:
Charging: We insert the harpoon into the muzzle and fix the shank in the piston, then, with the help of physical force, we begin to insert it into the barrel. Having reached the end position, the piston rests on the stop at the end of the barrel and pushes it back. The barrel chamber is closed by the trigger valve, the sear of the trigger mechanism engages with the barrel stop, while the barrel is filled with water. Yes, Z-Linka guns are not pneumatic. They are equipped with an ordinary muzzle with holes for water discharge.
Switch: When you pull the trigger, the sear unlocks the barrel, which feeds the trigger valve springs and the pressure in the receiver is shifted forward In this case, the barrel chamber is connected to the receiver chamber and the air from it begins to press on the piston. The piston begins to move along the barrel, accelerating the harpoon and pushing a small amount of water to the muzzle holes. A shot occurs.
As you can see, everything is simple. Simple and reliable. The use of this mechanism allows for much larger gun pumpings without increasing the risk of cross-fire.
The ability to pump the gun through the barrel. Despite the fact that the Pelengaz company implemented an injection valve in the Z-linka gun, by analogy with its serial guns, the gun retained the ability to pump through the muzzle. To do this, you just need to load the gun, unscrew the muzzle and using a standard harpoon and piston, you can pump up the gun. This is certainly not an easy task at first, but not having a pump at hand is not a bad thing.
Linebros system. In the Pelengas Z-linka gun, the developers decided to abandon the standard end line throw inherent in all Zelinsky system guns. Pelengas has implemented their own line-throw placement system on the Pelengas branded handle. When the linesbros is paired with the trigger. Those who believe this leads to an increase in line hanks can use magnetic line throws produced by Pelengas on the injection valve.
The set of the Pelengas Zelinka rifle includes:
Shotgun Pelengas Zelinka.
7mm Tahitian type harpoon in Sandvik steel with replaceable firing pin.
Lin nylon 2 mm, length 2.5 m.
The pump is collapsible.
Safe stainless steel charger.
Spare piston.
Passport instruction.
Features:
The ability to use the harpoon as a pump;
Moving barrel principle;
End thread for pump.
Receiver diameter: 32 mm;
Length: 55 cm;
For harpoons with a diameter: 7 mm;
Barrel material: stainless steel.