Yankee Drill Bits 5/64, 7/64, 9/64 Fits 133 233 135 Stanley Handyman Craftsman

Description

Set of 3 Drill Bits for the smaller size Stanley, Millers Falls and Craftsman
spiral ratchet screwdriver
Please read the complete description below before purchasing.
Bits included, 1 each:
5/64" Push Drill Bit
7/64" Push Drill Bit
9/64" Push Drill Bit
Will only fit Stanley Yankee, North Bros, Craftsman, Millers Falls Spiral Screwdrivers models:
29, 133, 133H, 68-133, 233, 233H, 68-233, 135, 68-135, 68-135A & B,  7101, 6301, 3102
***Bits have a 7/32" diameter shank. I obtained these "loose stock" bits from old hardware store.
***Note: these bits WILL NOT fit the small Silver Color push Drill. The small Push Drill uses the smaller 11/64" diameter Shank.
****Will Not Fit the following:
30, 30A, 130, 68-130, 130B, 131, 131A, 31, 31A, 68-131, 41, 41Y, 03-046, 03-049, 68-043, 46Y or "B" Bell.
***If you have a different model than is listed above, Please
email me and I will confirm if these bits will fit your screwdriver before purchasing.
Photos are representative of the bits you will receive. All are in new old stock with very slight variations,
NOTE: Push Screwdriver chuck is shown for representative purposes only. Screwdriver is not included in sale.
Sale is for the 3 bits only.
Inv# 103-333       90955
Inv# 103-333     906955